主控项目
Main control project
1）涂料防水层所用材料及配合比必须符合设计要求。
1) The material and mix proportion used in the waterproof coating must meet the design requirements.
检验方法：检查出厂合格证、质量检验报告、计量措施和现场抽样试验报告。
Inspection methods: Inspection of factory certificates, quality inspection reports, measurement measures and on-site sampling test reports.
2）涂料防水层及其转角处、变形缝、穿墙管道等细部做法均须符合设计要求。
2) The details of waterproof coating and its corner, deformation joint, wall-piercing pipeline and so on must meet the design requirements.
检验方法：观察检查和检查隐蔽工程验收记录。
Inspection method: Observe and inspect the acceptance records of concealed projects.
一般项目
General items
1）涂料防水层的基层应牢固，基面应洁净、平整，不得有空鼓、松动、起砂和脱皮现象；基层阴阳角处应做成圆弧形。
1) The base of the coating waterproof layer should be firm, the base surface should be clean and flat, and there should be no empty drum, loosening, sand and peeling phenomenon; the base should be made into a circular arc at the Yin and Yang corners.
检验方法：观察检查和检查隐蔽工程验收记录。
Inspection method: Observe and inspect the acceptance records of concealed projects.
2）涂料防水层应与基层粘结牢固，表面平整、涂刷均匀，不得有流淌、皱折、翘边、鼓泡、露胎体和翘边等缺陷。
2) The waterproofing layer of the coating should be firmly bonded with the base layer, with a flat surface and uniform brushing. No defects such as flow, wrinkle, warping, bubbling, exposed body and warping are allowed.
检验方法：观察检查
Inspection method: observation and examination